Bogen Car Speaker VRS1 User Manual

VANDAL-RESISTANT SPEAKER  
MODELVRS1  
DESCRIPTION  
The BogenVRS1 is a wall-mountable, vandal-resistant speaker with call-button designed for use with Bogen Multicom and Multi-  
Graphic communication systems. It consists of an 8-ohm loudspeaker, 25V transformer (tapped at 1/2 watt), and call-in switch  
mounted to a heavy-gauge stainless steel plate.The call-in switch can be wired to provide either momentary or latching opera-  
tion.The plate may be mounted to a 2-1/2" deep Gang Box (4-1/2"W x 6-13/16"H), such as Steel City (H2BD-3/4 &1), with one-  
way security screws.  
INSTALLATION  
A shielded-pair plus one-conductor cable is required.The unshielded conductor should be in a jacketed cable with the shielded  
pair, as in West Penn #358 or Belden #8724. Use the chart below to connect the cable to the speaker. Refer to the appropriate  
system installation instructions to terminate the cable at the system control center.  
VRS1 Wire Color  
Conductor  
White  
Red  
Unshielded conductor (in Multicom and other “momentary” systems)  
Unshielded conductor (in Multi-Graphic,ACD, and other “latching” systems)  
Blue  
Cable shield  
Black  
Yellow  
Shielded conductor  
Shielded conductor  
B74-6377-01  
VRS1 Schematic Diagram  
Part No. 54-5921-01R2  
Printed in Korea 0109  
50 Spring Street, Ramsey, NJ 07446, U.S.A.  
Tel. 201-934-8500; Fax: 201-934-9832; www.bogen.com  
Specifications subject to changes without notice.  
 

Blue Rhino Charcoal Grill 253594 User Manual
Bosch Appliances Blender MMB 1000 UC User Manual
BOXLIGHT Projector CD 725c User Manual
Braun Food Saver MRV 4050 CA User Manual
Brother Sewing Machine BES 1261BC User Manual
Cal Spas Hot Tub Spa Surrounds User Manual
Campbell Hausfeld eBook Reader PW1876 User Manual
Canon Printer BJ 200ex User Manual
Carrier Air Conditioner 37HS User Manual
Carson Car Amplifier SA 441 83F User Manual