Built-in CleanDesign™ cooktops
Cooktop dimensions (in inches)
GE Profile™
PHP960SM
PHP960DM
●
PHP900SM
To edge of front
counter (min.)
G
PHP900DM
Overall
Cutout
ADA-compliant
Features
Model
PHP960DM
PHP900DM
W
36
29-3/4
D
20-7/8
21-3/8
H
E
F
3-1/4*
3-1/4*
33-7/8
19-1/8
2-1/2**
2-1/2**
Pattern. black
Pattern. black
Pattern. black
Pattern. black
28-1/2
19-5/8
Ceramic-glass surface
Number of elements
Induction elements
11" heating elements
8" heating elements
7" heating elements
*Depth of unit at conduit connection location (rear) is 4-5/8" on model PHP960/900.
5 induction
4 induction
**Raised bull nose countertops may require up to 3/8" additional clearance to prevent interference with curved front.
●
●
1 (3700W)
1 (3200W)**
2 (2500W)**
1 (3700W) )**
2 (2500W)**
1 (1800W)**
Stainless steel cooktop dimensions (in inches)
6" heating elements
Hot surface indicator lights
Precise Digital Control System™
Pan presence sensor
Pan size sensor
1 (1800W) )**
To edge of front
counter (min.)
G
5
●
4
●
Overall
D
Cutout
Model
W
H
E
F
●
●
●
●
●
●
●
●
36-1/8
29-7/8
21
21-1/2
3-1/4*
3-1/4*
33-7/8
28-1/2
19-1/8
19-5/8
2-1/2**
2-1/2**
PHP960SM
PHP900SM
Kitchen timer
Control lock capability
*Depth of unit at conduit connection location (rear) is 4-5/8" on model PHP960/900.
**Raised bull nose countertops may require up to 3/8" additional clearance to prevent interference with curved front.
Appearance
SS
SS
Color appearance*
Frameless
BB
BB
BB
BB
Cooktop dimensions (in inches)
Stainless steel frame
Weight & Dimensions
Cooktop width (in inches)
Approx. shipping wt. (lbs.)
Power/Ratings
SS models only
SS models only
D
36
59
30
49
W
H
Cooktop
240V
8.6
6.5
50
7.4
5.6
40
40
KW rating @
208V
240V
208V
F
Amps @
50
*SS = Stainless Steel, BB = Black on black.
**Highest wattage available using power share. Consult use and care manual for more
information on powershare.
E
G
Required
Built-in induction cooktops
Filler trim kit
When replacing an old GE 30" cooktop (with
larger opening) with 30" models, use the
following one-piece trim kit to fill in the over-
size hole. Available at additional cost.
JXTR32B (Black)
Requires a 12” min. free area between the
bottom of the cooktop to any combustible
material, i.e. shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Unite are
furnished with a 36” flexible armored cable.
Installation information:
Before installing, consult installation
instructions packed with product for current
dimensional data.
30” and 36” induction cooktops are approved
for use over GE, GE Profile and GE Monogram
30” and 27” single wall ovens*. Refer to cooktop
and wall oven installation instructions packed
with product for current dimensional data.
*Except Trivection® wall ovens.
Notes: If installing with a 36" GE Profile or GE Monogram® Telescopic Downdraft System, consult
both cooktop and downdraft installation instructions packed with product before installing.
Cooktop gas/electric supply may need to be re-routed to install downdraft.
The countertop must be at least 26" deep with a flat surface area of 23-1/2" or more, front to back.
Stainless CleanDesign and gas on glass cooktops require 23-5/8" flat surface area. In addition,
other clearances to the front edge of the countertop must be considered.
Note: Consult cabinet and countertop manufacturer’s specs for flush mount installation prior to install.
70
|