Bosch Appliances UML 193 90 User Manual

Bosch High Performance HD  
LED Monitors  
UML-193-90 | UML-223-90  
en User's Manual  
Bosch HD LCD Monitors  
Table of Contents | en  
3
Table of Contents  
1
Safety  
5
5
1.1  
1.2  
1.3  
1.4  
Important safety instructions  
Safety precautions  
8
Important notices  
8
Customer Support and Service  
15  
2
Unpacking  
17  
2.1  
Parts List  
17  
3
Access and Connections  
Front Control Panel  
Bottom Panel  
18  
18  
19  
3.1  
3.2  
4
Description  
Features  
Power  
20  
20  
21  
4.1  
4.2  
5
Installing the Monitor  
Ventilation  
22  
22  
22  
23  
23  
23  
24  
24  
24  
5.1  
5.2  
Desktop Installation  
Connecting Power  
5.3  
5.4  
Connecting Audio to the Monitor  
Connecting the PC Signal to the Monitor  
HDMI Connection  
5.5  
5.5.1  
5.5.2  
5.5.3  
DVI Connection  
VGA Connection  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
4
en | Table of Contents  
Bosch HD LCD Monitors  
6
Navigating the Monitor  
25  
25  
26  
27  
28  
29  
30  
31  
6.1  
6.2  
6.3  
6.4  
6.5  
6.6  
6.7  
Navigating the Front Panel  
Using the Monitor On-screen Display (OSD)  
On-screen Display Menus  
Image Menu  
Display Menu  
Sound Menu  
System Menu  
7
Power Management  
Power Consumption  
LED Indicator  
33  
33  
33  
7.1  
7.2  
8
Troubleshooting  
Maintenance  
34  
36  
37  
9
10  
Technical Specifications  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Safety | en  
5
1
Safety  
1.1  
Important safety instructions  
Read, follow, and retain for future reference all of the following  
safety instructions. Heed all warnings on the unit and in the  
operating instructions before operating the unit.  
1. Cleaning - Unplug the unit from the outlet before cleaning.  
Follow any instructions provided with the unit. Generally,  
using a dry cloth for cleaning is sufficient, but a moist fluff-  
free cloth or leather shammy may also be used. Do not use  
liquid cleaners or aerosol cleaners.  
2. Heat Sources - Do not install the unit near any heat  
sources such as radiators, heaters, stoves, or other  
equipment (including amplifiers) that produce heat.  
3. Ventilation - Any openings in the unit enclosure are  
provided for ventilation to prevent overheating and ensure  
reliable operation. Do not block or cover these openings.  
Do not place the unit in an enclosure unless proper  
ventilation is provided, or the manufacturer's instructions  
have been adhered to.  
4. Water - Do not use this unit near water, for example near a  
bathtub, washbowl, sink, laundry basket, in a damp or wet  
basement, near a swimming pool, in an outdoor  
installation, or in any area classified as a wet location. To  
reduce the risk of fire or electrical shock, do not expose  
this unit to rain or moisture.  
5. Object and liquid entry - Never push objects of any kind  
into this unit through openings as they may touch  
dangerous voltage points or short-out parts that could  
result in a fire or electrical shock. Never spill liquid of any  
kind on the unit. Do not place objects filled with liquids,  
such as vases or cups, on the unit.  
6. Lightning - For added protection during a lightning storm,  
or when leaving this unit unattended and unused for long  
periods, unplug the unit from the wall outlet and  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
6
en | Safety  
Bosch HD LCD Monitors  
disconnect the cable system. This will prevent damage to  
the unit from lightning and power line surges.  
7. Controls adjustment - Adjust only those controls specified  
in the operating instructions. Improper adjustment of  
other controls may cause damage to the unit. Use of  
controls or adjustments, or performance of procedures  
other than those specified, may result in hazardous  
radiation exposure.  
8. Overloading - Do not overload outlets and extension cords.  
This can cause fire or electrical shock.  
9. Power cord and plug protection - Protect the plug and  
power cord from foot traffic, being pinched by items  
placed upon or against them at electrical outlets, and its  
exit from the unit.  
10. Power disconnect - Units have power supplied to the unit  
whenever the power cord is inserted into the power  
source. The power cord is the main power disconnect  
device for switching off the voltage for all units.  
11. Power sources - Operate the unit only from the type of  
power source indicated on the label. Before proceeding,  
be sure to disconnect the power from the cable to be  
installed into the unit.  
For battery powered units, refer to the operating  
instructions.  
For external power supplied units, use only the  
recommended or approved power supplies.  
For limited power source units, this power source  
must comply with EN60950. Substitutions may  
damage the unit or cause fire or shock.  
If unsure of the type of power supply to use, contact  
your dealer or local power company.  
12. Servicing - Do not attempt to service this unit yourself.  
Opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified  
service personnel.  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Safety | en  
7
13. Damage requiring service - Unplug the unit from the main  
AC power source and refer servicing to qualified service  
personnel when any damage to the equipment has  
occurred, such as:  
the power supply cord or plug is damaged;  
exposure to moisture, water, and/or inclement  
weather (rain, snow, etc.);  
liquid has been spilled in or on the equipment;  
an object has fallen into the unit;  
unit has been dropped or the unit cabinet is damaged;  
unit exhibits a distinct change in performance;  
unit does not operate normally when the user  
correctly follows the operating instructions.  
14. Replacement parts - Be sure the service technician uses  
replacement parts specified by the manufacturer, or that  
have the same characteristics as the original parts.  
Unauthorized substitutions may cause fire, electrical  
shock, or other hazards.  
15. Safety check - Safety checks should be performed upon  
completion of service or repairs to the unit to ensure  
proper operating condition.  
16. Installation - Install in accordance with the manufacturer's  
instructions and in accordance with applicable local codes.  
17. Attachments, changes or modifications - Only use  
attachments/accessories specified by the manufacturer.  
Any change or modification of the equipment, not  
expressly approved by Bosch, could void the warranty or,  
in the case of an authorization agreement, authority to  
operate the equipment.  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
8
en | Safety  
Bosch HD LCD Monitors  
1.2  
Safety precautions  
DANGER!  
High risk: This symbol indicates an imminently hazardous  
situation such as “Dangerous Voltage” inside the product.  
If not avoided, this will result in an electrical shock, serious  
bodily injury, or death.  
WARNING!  
Medium risk: Indicates a potentially hazardous situation.  
If not avoided, this could result in minor or moderate bodily  
injury.  
CAUTION!  
Low risk: Indicates a potentially hazardous situation.  
If not avoided, this could result in property damage or risk of  
damage to the unit.  
1.3  
Important notices  
Accessories - Do not place this unit on an unstable stand,  
tripod, bracket, or mount. The unit may fall, causing serious  
injury and/or serious damage to the unit. Use only with the cart,  
stand, tripod, bracket, or table specified by the manufacturer.  
When a cart is used, use caution and care when moving the  
cart/apparatus combination to avoid injury from tip-over. Quick  
stops, excessive force, or uneven surfaces may cause the cart/  
unit combination to overturn. Mount the unit per the  
manufacturer's instructions.  
All-pole power switch - Incorporate an all-pole power switch,  
with a contact separation of at least 3 mm in each pole, into the  
electrical installation of the building.If it is needed to open the  
housing for servicing and/or other activities, use this all-pole  
switch as the main disconnect device for switching off the  
voltage to the unit.  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Safety | en  
9
Coax grounding:  
Ground the cable system if connecting an outside cable  
system to the unit.  
Connect outdoor equipment to the unit's inputs only after  
this unit has had its grounding plug connected to a  
grounded outlet or its ground terminal is properly  
connected to a ground source.  
Disconnect the unit's input connectors from outdoor  
equipment before disconnecting the grounding plug or  
grounding terminal.  
Follow proper safety precautions such as grounding for  
any outdoor device connected to this unit.  
U.S.A. models only - Section 810 of the National Electrical Code,  
ANSI/NFPA No.70, provides information regarding proper  
grounding of the mount and supporting structure, grounding of  
the coax to a discharge unit, size of grounding conductors,  
location of discharge unit, connection to grounding electrodes,  
and requirements for the grounding electrode.  
Disposal - Your Bosch product was developed and  
manufactured with high-quality material and components that  
can be recycled and reused. This symbol means that electronic  
and electrical appliances, which have reached the end of their  
working life, must be collected and disposed of separately from  
household waste material. Separate collecting systems are  
usually in place for disused electronic and electrical products.  
Please dispose of these units at an environmentally compatible  
recycling facility, per European Directive 2002/96/EC  
Electronic Surveillance - This device is intended for use in  
public areas only. U.S. federal law strictly prohibits  
surreptitious recording of oral communications.  
Environmental statement - Bosch has a strong commitment  
towards the environment. This unit has been designed to  
respect the environment as much as possible.  
Electrostatic-sensitive device - Use proper CMOS/MOS-FET  
handling precautions to avoid electrostatic discharge.  
NOTE: Wear required grounded wrist straps and observe proper  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
10 en | Safety  
Bosch HD LCD Monitors  
ESD safety precautions when handling the electrostatic-  
sensitive printed circuit boards.  
Fuse rating - For security protection of the device, the branch  
circuit protection must be secured with a maximum fuse rating  
of 16A. This must be in accordance with NEC800 (CEC Section  
60).  
Grounding and polarization - This unit may be equipped with a  
polarized alternating current line plug (a plug with one blade  
wider than the other blade). This safety feature allows the plug  
to fit into the power outlet in only one way. If unable to insert  
the plug fully into the outlet, contact a locally certified  
electrician to replace the obsolete outlet. Do not defeat the  
safety purpose of the polarized plug.  
Alternately, this unit may be equipped with a 3-pole grounding  
plug (a plug with a third pin for earth grounding). This safety  
feature allows the plug to fit into a grounded power outlet only.  
If unable to insert the plug into the outlet, contact a locally  
certified electrician to replace the obsolete outlet. Do not  
defeat the safety purpose of the grounding plug.  
Moving - Disconnect the power before moving the unit. Move  
the unit with care. Excessive force or shock may damage the  
unit and the hard disk drives.  
Outdoor signals - The installation for outdoor signals, especially  
regarding clearance from power and lightning conductors and  
transient protection, must be in accordance with NEC725 and  
NEC800 (CEC Rule 16-224 and CEC Section 60).  
Permanently connected equipment - Incorporate a readily  
accessible disconnect device in the building installation wiring.  
Pluggable equipment - Install the socket outlet near the  
equipment so it is easily accessible.  
Power resupply - If the unit is forced to power down due to  
exceeding the specified operating temperatures, disconnect  
the power cord, wait for at least 30 seconds, and then  
reconnect the power cord.  
Power lines - Do not locate the display near overhead power  
lines, power circuits, or electrical lights, nor where it may  
contact such power lines, circuits, or lights.  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Safety | en 11  
Rack-mount  
Ventilation - Do not place this unit in a built-in installation  
or rack without proper ventilation or adhering to the  
manufacturer's instructions. The equipment must not  
exceed its maximum operating temperature requirements.  
Mechanical loading - Properly mount the equipment in a  
rack to prevent a hazardous condition due to uneven  
mechanical loading.  
SELV  
All the input/output ports are Safety Extra Low Voltage (SELV)  
circuits. SELV circuits should only be connected to other SELV  
circuits.  
Because the ISDN circuits are treated like telephone-network  
voltage, avoid connecting the SELV circuit to the Telephone  
Network Voltage (TNV) circuits.  
System ground/Safety ground  
The system ground is only used to comply with safety standards  
or installation practices in certain countries. Bosch does not  
recommend connecting system ground to safety ground unless  
it is explicitly required. However, if the system ground and  
safety ground are connected and grounding loops are causing  
interference in the video signal, use an isolation transformer  
(available separately from Bosch).  
CAUTION!  
Connecting System ground to Safety ground may result in  
ground loops that can disrupt the CCTV system.  
Video loss - Video loss is inherent to digital video recording;  
therefore, Bosch Security Systems cannot be held liable for any  
damage that results from missing video information. To  
minimize the risk of lost digital information, Bosch Security  
Systems recommends multiple, redundant recording systems,  
and a procedure to back up all analog and digital information.  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
12 en | Safety  
Bosch HD LCD Monitors  
NOTICE!  
This is a class A product. In a domestic environment this  
product may cause radio interference, in which case the user  
may be required to take adequate measures.  
FCC & ICES Information  
(U.S.A. and Canadian Models Only)  
This device complies with part 15 of the FCC Rules. Operation is  
subject to the following conditions:  
this device may not cause harmful interference, and  
this device must accept any interference received,  
including interference that may cause undesired operation.  
NOTE: This equipment has been tested and found to comply  
with the limits for a Class A digital device, pursuant to Part 15  
of the FCC Rules and ICES-003 of Industry Canada. These limits  
are designed to provide reasonable protection against harmful  
interference when the equipment is operated in a commercial  
environment. This equipment generates, uses, and radiates  
radio frequency energy and, if not installed and used in  
accordance with the instruction manual, may cause harmful  
interference to radio communications. Operation of this  
equipment in a residential area is likely to cause harmful  
interference, in which case the user will be required to correct  
the interference at his expense.  
Intentional or unintentional modifications, not expressly  
approved by the party responsible for compliance, shall not be  
made. Any such modifications could void the user's authority to  
operate the equipment. If necessary, the user should consult  
the dealer or an experienced radio/television technician for  
corrective action.  
The user may find the following booklet, prepared by the  
Federal Communications Commission, helpful: How to Identify  
and Resolve Radio-TV Interference Problems. This booklet is  
available from the U.S. Government Printing Office,  
Washington, DC 20402, Stock No. 004-000-00345-4.  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Safety | en 13  
Informations FCC et ICES  
(modèles utilisés aux États-Unis et au Canada uniquement)  
Ce produit est conforme aux normes FCC partie 15. la mise en  
service est soumises aux deux conditions suivantes :  
cet appareil ne peut pas provoquer d'interférence nuisible  
et  
cet appareil doit pouvoir tolérer toutes les interférences  
auxquelles il est soumit, y compris les interférences qui  
pourraient influer sur son bon fonctionnement.  
AVERTISSEMENT : Suite à différents tests, cet appareil s’est  
révélé conforme aux exigences imposées aux appareils  
numériques de Classe A en vertu de la section 15 du règlement  
de la Commission fédérale des communications des États-Unis  
(FCC). Ces contraintes sont destinées à fournir une protection  
raisonnable contre les interférences nuisibles quand l'appareil  
est utilisé dans une installation commerciale. Cette appareil  
génère, utilise et émet de l'energie de fréquence radio, et peut,  
en cas d'installation ou d'utilisation non conforme aux  
instructions, générer des interférences nuisibles aux  
communications radio. L’utilisation de ce produit dans une  
zone résidentielle peut provoquer des interférences nuisibles.  
Le cas échéant, l’utilisateur devra remédier à ces interférences  
à ses propres frais.  
Au besoin, l’utilisateur consultera son revendeur ou un  
technicien qualifié en radio/télévision, qui procédera à une  
opération corrective. La brochure suivante, publiée par la  
Commission fédérale des communications (FCC), peut s’avérer  
utile : How to Identify and Resolve Radio-TV Interference Problems  
(Comment identifier et résoudre les problèmes d’interférences  
de radio et de télévision). Cette brochure est disponible auprès  
du U.S. Government Printing Office, Washington, DC 20402,  
États-Unis, sous la référence n° 004-000-00345-4.  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
14 en | Safety  
Bosch HD LCD Monitors  
Disclaimer  
Underwriter Laboratories Inc. (“UL”) has not tested the  
performance or reliability of the security or signaling aspects of  
this product. UL has only tested fire, shock and/or casualty  
hazards as outlined in UL's Standard(s) for Safety for Closed  
Circuit Television Equipment, UL 2044. UL Certification does not  
cover the performance or reliability of the security or signaling  
aspects of this product.  
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR  
CERTIFICATIONS WHATSOEVER REGARDING THE  
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR  
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.  
Disclaimer  
Underwriter Laboratories Inc. (“UL”) has not tested the  
performance or reliability of the security or signaling aspects of  
this product. UL has only tested fire, shock and/or casualty  
hazards as outlined in UL's Standard(s) for Safety for Information  
Technology Equipment, UL 60950-1. UL Certification does not  
cover the performance or reliability of the security or signaling  
aspects of this product.  
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR  
CERTIFICATIONS WHATSOEVER REGARDING THE  
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR  
SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT.  
Copyright  
This manual is the intellectual property of Bosch Security  
Systems and is protected by copyright.  
All rights reserved.  
Trademarks  
All hardware and software product names used in this  
document are likely to be registered trademarks and must be  
treated accordingly.  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Safety | en 15  
NOTE!  
This manual has been compiled with great care and the  
information it contains has been thoroughly verified. The text  
was complete and correct at the time of printing. The ongoing  
development of the products may mean that the content of the  
user guide can change without notice. Bosch Security Systems  
accepts no liability for damage resulting directly or indirectly  
from faults, incompleteness or discrepancies between the user  
guide and the product described.  
1.4  
Customer Support and Service  
If this unit needs service, contact the nearest Bosch Security  
Systems Service Center for authorization to return and shipping  
instructions.  
Service Centers  
USA  
Repair Center-  
Telephone: 800-566-2283  
Fax: 800-366-1329  
Customer Service  
Telephone: 888-289-0096  
Fax: 585-223-9180  
Technical Support  
Telephone: 800-326-1450  
Fax: 585-223-3508 or 717-735-6560  
Canada  
Telephone: 514-738-2434  
Fax: 514-738-8480  
Europe, Middle East, Africa Region  
Repair Center  
Telephone: 31 (0) 76-5721500  
Fax: 31 (0) 76-5721413  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
16 en | Safety  
Bosch HD LCD Monitors  
Asia Region  
Repair Center  
Telephone: 65 63522776  
Fax: 65 63521776  
Customer Service  
Telephone: 86 (0) 756 7633117 or  
86 (0) 756 7633121  
Fax: 86 (0) 756 7631710  
Warranty and more information  
For additional information and warranty queries, please contact  
your Bosch Security Systems representative or visit our website  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Unpacking | en 17  
2
Unpacking  
This equipment should be unpacked and handled with care. If  
an item appears to have been damaged in shipment, notify the  
shipper immediately.  
Verify that all the parts listed in the Parts List below are  
included. If any items are missing, notify your Bosch Security  
Systems Sales or Customer Service Representative.  
The original packing carton is the safest container in which to  
transport the unit and must be used if returning the unit for  
service. Save it for possible future use.  
2.1  
Parts List  
Quantity Description  
1
1
2
1
1
2
UML-193-90 or UML 223-90 Color LCD Flat Panel Monitor  
Monitor Stand  
FS4 x 12 screws, for monitor stand  
Installation manual (printed booklet, English version)  
Installation manual (CD-ROM, multi-language version)  
Power Cords, 3-wire with grounded plug 1.8 m (6 ft) long:  
one with a U.S plug type and one with a European Continental  
plug type  
1
1
1
1
Power adapter  
DVI-D to DVI-D cable, 1.8 m (6 ft)  
VGA to VGA (D-Sub) cable, 1.8 m (6 ft)  
Stereo cable, 1.8 m (6 ft)  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
18 en | Access and Connections  
Bosch HD LCD Monitors  
3
Access and Connections  
3.1  
Front Control Panel  
Figure 3.1 UML-193-90/UML-223-90 Front Panel  
Ref. # Button/Part Description  
1
2
6
SOURCE  
MENU  
Selects the signal to be displayed.  
Opens the on-screen display (OSD) menus.  
Adjusts the value when in the  
Scrolls down in the  
AUTO /  
OSD.  
OSD.  
Activates the Auto Adjustment  
function when in PC mode.  
Adjusts the value when in the  
5
3
Scrolls up in the  
OSD.  
OSD.  
Decreases the value when in the Scrolls left in the  
OSD.  
OSD.  
Decreases audio volume.  
4
Increases the value when in the Scrolls right in the  
OSD.  
OSD.  
Serves as the Enter function for  
OSD menus.  
Increases audio volume.  
Display power (On/Off).  
LED Indicator Indicates the operating status of the monitor:  
7
8
Power  
Power On, Standby (blue)  
Power Off (LED off)  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Access and Connections | en 19  
3.2  
Bottom Panel  
Figure 3.2 Bottom View (I/O Panel)  
Ref. Connector  
1
2
3
4
5
6
Upgrade  
PC Stereo IN (VGA and DVI In)  
VGA IN  
DVI IN  
HDMI IN  
DC 12V  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
20 en | Description  
Bosch HD LCD Monitors  
4
Description  
The Bosch High Performance Family of LCD monitors display  
PAL or NTSC standard color pictures in CCTV systems. The  
monitors include: an analog VGA input using a 15-pin D-sub  
connector to accommodate the increasing use of PCs and  
digital video devices in security applications, a High Definition  
Multimedia Input (HDMI) and DVI connectors. You access  
monitor control functions from the push buttons and the on-  
screen display (OSD) menus. Refer to Section 3 Access and  
Connections, page 18, for descriptions of the connectors and  
push buttons available on each model.  
4.1  
Features  
18.5-inch and 21.5-inch models  
VGA Input  
640 x 480 (60 Hz)  
720 x 400 (70 Hz)  
800 x 600 (60 Hz)  
1024 x 768 (60 Hz)  
1280 x 768 (60 Hz)  
1360 x 768 (60 Hz)  
1440 x 900 (60 Hz)  
1680 x 1050 (60 Hz)  
1920 x 1080 (60Hz)  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Description | en 21  
DVI, HDMI Input  
480i (60 Hz)  
576i (50 Hz)  
480p (60 Hz)  
576p (50 Hz)  
720p (50/60 Hz)  
1080i (50/60 Hz)  
1080p (24/25/30/50/60 Hz)  
640 x 480 (60 Hz)  
720 x 400 (70 Hz)  
800 x 600 (60 Hz)  
1024 x 768 (60 Hz)  
1280 x 768 (60 Hz)  
1360 x 768 (60 Hz)  
1440 x 900 (60 Hz)  
1680 x 1050 (60 Hz)  
1920 x 1080 (60Hz)  
4.2  
Power  
Model No. Rated Voltage Voltage Range Power at Rated Sync Format  
Voltage  
UML-193-90 120/230 VAC 100 to 240 V  
< 42 W  
NTSC/PAL  
50/60 Hz  
UML-223-90 120/230 VAC 100 to 240 V  
< 42 W  
NTSC/PAL  
50/60 Hz  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
22 en | Installing the Monitor  
Bosch HD LCD Monitors  
5
Installing the Monitor  
This chapter outlines the procedures to install the monitor. A  
qualified service person should install the monitor and adhere  
to all local codes.  
5.1  
5.2  
Ventilation  
To prevent overheating, ensure that the ventilation openings on  
the rear of the monitor are not covered.  
Desktop Installation  
Before setting up the monitor, ensure that the power to the  
monitor and other attached devices are turned off.  
1. Connect the stand:  
a. Place the monitor with its front facing downward on a  
soft cloth.  
b. Assemble the Stand Base into the Stand Body in the  
correct direction using the included screws in the  
accessory box.  
c. Once assembled pick the monitor up carefully and  
turn to the front side.  
1
2
3
Stand Body  
Stand Base  
FS4 x 12 Screws  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Installing the Monitor | en 23  
2. Position the monitor:  
a. The viewing angle of the LCD can be adjusted to fit  
the most comfortable viewing position. (Tilt Range: -  
3°~15°)  
-3˚  
15˚  
5.3  
Connecting Power  
The Bosch Flat Panel CCTV monitors are delivered with a 3-pole  
US-style power cord and a 3-pole Euro-style power cord. Use  
the US-style power cord where 120 VAC, 60 Hz power is  
available; use the Euro-style power cord where 230 VAC, 50 Hz  
power is available. The monitor automatically adjusts to either  
power input voltage.  
5.4  
5.5  
Connecting Audio to the Monitor  
There is one (1) set of stereo audio connectors for audio input,  
located on the rear panel. This audio input is not associated  
with any input terminals on the rear panel, and can be freely  
connected to any audio input.  
Connecting the PC Signal to the Monitor  
There are three ways to connect the PC signal to the monitor:  
HDMI, DVI, and VGA.  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
24 en | Installing the Monitor  
Bosch HD LCD Monitors  
5.5.1  
HDMI Connection  
The monitor can be connected to the HDMI (High Definition  
Multimedia Input) by connecting a HDMI cable (not supplied).  
Figure 5.1 HDMI Input  
5.5.2  
DVI Connection  
The monitor can be connected by using the supplied DVI-D  
cable and connecting it to the digital DVI-D signal.  
Figure 5.2 DVI Input  
5.5.3  
VGA Connection  
You can connect PC signal to the monitor using the VGA  
connector on the rear panel and a VGA cable (D-SUB to D-SUB).  
Figure 5.3 VGA Input  
Pin Description Pin Description  
Pin Description  
1
2
3
4
5
Red Video  
Green Video 7  
Blue Video  
Ground  
Ground  
6
Red Ground  
Green Ground  
Blue Ground  
N/A  
11  
12  
13  
14  
Ground  
SDA (for DDC)  
H-Sync or H+V Sync  
V-Sync  
8
9
10  
Signal Cable Detect 15  
SCL (for DDC)  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Navigating the Monitor | en 25  
6
Navigating the Monitor  
6.1  
Navigating the Front Panel  
Use the front panel to make any necessary OSD adjustments.  
See the figure below for an explanation of the front panel.  
Figure 6.1 Front Panel Buttons  
Ref. # Button/Part Description  
1
2
6
SOURCE  
MENU  
Selects the signal to be displayed.  
Opens the on-screen display (OSD) menus.  
Adjusts the value when in the  
Scrolls down in the  
AUTO /  
OSD.  
OSD.  
Activates the Auto Adjustment  
function when in PC mode.  
Adjusts the value when in the  
5
3
Scrolls up in the  
OSD.  
OSD.  
Decreases the value when in the Scrolls left in the  
OSD.  
OSD.  
Decreases audio volume.  
4
Increases the value when in the Scrolls right in the  
OSD.  
OSD.  
Serves as the Enter function for  
OSD menus.  
Increases audio volume.  
Display power (On/Off).  
LED Indicator Indicates the operating status of the monitor:  
7
8
Power  
Power On, Standby (blue)  
Power Off (LED off)  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
26 en | Navigating the Monitor  
Bosch HD LCD Monitors  
6.2  
Using the Monitor On-screen Display  
(OSD)  
The LCD is programmed through the on-screen display (OSD)  
menus and submenus where an operator can select operating  
parameters. To access the OSD menus, press the Menu button  
on the control panel. Use these controls to make any necessary  
adjustments to the OSD.  
NOTICE!  
When you are navigating through the OSD menus, use the  
SOURCE or ENTER button to select a menu and use the MENU  
button to exit a menu.  
To navigate the set up menus, follow the steps below:  
1. Connect a video source cable to the monitor.  
2. Press the Power button to turn on the unit.  
3. If required, press the SOURCE or ENTER button and then  
the and the  
and  
buttons until a signal is displayed.  
4. Press the Menu button to activate the main menu  
selections.  
5. Press the  
6. Press the  
7. Press the  
8. Press the  
and  
buttons to select a menu.  
button to enter the selected menu.  
and  
and  
buttons to select a sub-menu item.  
buttons to toggle the OSD values.  
9. Press the Menu button to exit the selected menu and to  
return to the menu bar or to confirm a selection.  
10. Press the Menu button again to exit the OSD menu bar.  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Navigating the Monitor | en 27  
6.3  
On-screen Display Menus  
There are four (4) on-screen menus that allow you to customize  
your settings. Press the Menu button to access the OSD menu.  
Icon  
Menu Function  
Image Adjusts the Brightness, Contrast, Color Temperature,  
Zoom, and Information Bar settings.  
Display Adjusts the Auto adjust, Phase, Clock, Display position  
and Auto color settings. (PC mode.)  
Sound Adjusts the Volume and Mute settings.  
System Resets the factory default settings and adjusts the  
Language, Key Lock, Image Rotation and OSD settings.  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
28 en | Navigating the Monitor  
Bosch HD LCD Monitors  
6.4  
Image Menu  
To access the Image menu, press the Menu button on the front  
panel of the monitor, then press the Up and Down arrow  
buttons to select the Image icon. Press the Left arrow button to  
enter the menu, and then press the Up and Down arrow  
buttons to select a submenu. When finished, press the Menu  
button to save any changes, then press the Menu button again  
to exit the OSD.  
Image  
Brightness  
Contrast  
000  
000  
Color Temp.  
Zoom  
Information Bar  
4:3  
On  
:Move  
:Select  
:Menu  
Submenu  
Definition  
Brightness  
Adjusts the brightness level for video performance (range 0-  
100).  
Contrast  
Adjusts the intensity of the image (range 0-100).  
Color Temp. Adjusts the color of the picture Choices are Warm, Normal,  
Cool, and User (Red, Green, and Blue).  
Zoom  
Sets the aspect ration for the monitor. Choices are 16:9 and  
4:3.  
Information Displays two bars on either side of the image when the  
Bar monitor displays an image transmitted in 4:3:  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Navigating the Monitor | en 29  
6.5  
Display Menu  
To access the Display menu, press the Menu button on the front  
panel of the monitor, then press the Up and Down arrow  
buttons to select the Display icon. Press the Left arrow button  
to enter the menu, and then press the Up and Down arrow  
buttons to select a submenu. When finished, press the Menu  
button to save any changes, then press the Menu button again  
to exit the OSD.  
Display  
Auto Adjust  
Phase  
Clock  
000  
000  
Display Position  
Auto Color  
:Move  
:Select  
:Menu  
Submenu  
Auto Adjust  
Phase  
Definition  
Automatic adjustment of the screen geometry.  
Adjusts the number of horizontal picture elements  
(range 0-100).  
Clock  
Adjusts the vertical noise of screen image (range 0-  
100).  
Display Position  
Auto Color  
Moves the horizontal and vertical position of the  
picture.  
Adjusts the automatic color balance.  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
30 en | Navigating the Monitor  
Bosch HD LCD Monitors  
6.6  
Sound Menu  
To access the Sound menu, press the Menu button on the  
control panel of the monitor, then press the UP and Down  
arrow buttons to select the Sound icon. Press the Left arrow  
button to enter the menu, and then press the Up and Down  
arrow buttons to select a submenu. When finished, press the  
Menu button to save any changes, then press the Menu button  
again to exit the OSD.  
Sound  
Volume  
Mute  
100  
OFF  
:Move  
:Select  
:Menu  
Submenu  
Volume  
Mute  
Definition  
Controls the built-in speaker volume (range 0-100).  
Enables/disables audio. Choices are: On and Off.  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Navigating the Monitor | en 31  
6.7  
System Menu  
To access the System menu, press the Menu button on the  
control panel of the monitor, then press the UP and Down  
arrow buttons to select the System icon. Press the Left arrow  
button to enter the menu, and then press the Up and Down  
arrow buttons to select a submenu. When finished, press the  
Menu button to save any changes, then press the Menu button  
again to exit the OSD.  
System  
Input  
OSD Settings  
Language  
Key Lock  
Image Rotation  
Reset  
On  
On  
Firmware Version  
:Move  
:Select  
:Menu  
Submenu  
Definition  
Input  
Selects the video input source. Choices are VGA, HDMI, and  
DVI.  
OSD Settings Adjusts the number of horizontal picture elements.  
Choices are Timer (3sec, 6sec, 12sec), Rotation (0°, 90°,  
180°, 270°), Position, and Transparancy (range 0-100).  
Language  
Adjusts the language of the OSD.  
Choices are: English, French, Spanish, Dutch, German,  
Italian, Portuguese, Polish, Simplified Chinese and  
Russian.  
Key Lock  
Enables or disables the Key Lock function.  
Image Rotation Activates the Image Rotation function. This function slightly  
moves the displayed image to prevent image persistence.  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
32 en | Navigating the Monitor  
Bosch HD LCD Monitors  
Reset  
Firmware  
Restores default settings.  
Displays the release level of the monitor firmware.  
Version  
NOTICE!  
When Key Lock is enabled through the front panel, use the front  
panel buttons to disable the key lock command. To disable the  
Key Lock feature using the front panel buttons, press and hold  
both the Down arrow and the Left arrow buttons until the  
monitor displays the Key Unlocked message.  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Power Management | en 33  
7
Power Management  
7.1  
Power Consumption  
Mode  
Power Consumption  
UML-193-90 UML-223-90  
ON  
ACTIVE OFF  
< 42 W  
0.5 W  
7.2  
LED Indicator  
The power management feature of the monitor is comprised of  
these stages:  
Mode  
LED Color Monitor Operation  
ON  
Blue  
Normal Operation  
Standby Operation  
POWER OFF LED Off  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
34 en | Troubleshooting  
Bosch HD LCD Monitors  
8
Troubleshooting  
Problem  
Solution  
No image displayed on  
Check that the power cord of the monitor is  
securely connected into the wall outlet or  
grounded extension cable or strip.  
Power switch should be in the ON position  
and the LED lit.  
screen  
Check that the Brightness and/or Contrast  
adjustments of the display have not been  
turned down to minimum levels.  
Display image is not  
Push the down arrow key to activate the Auto  
centered, is too small or Adjust function.  
too large in the PC mode - or -  
Adjust the Frequency and Phase in the PC OSD  
submenu.  
Vertical or horizontal  
noise is present in the  
picture  
Push the down arrow key to activate the Auto  
Adjust function.  
- or -  
Adjust the Frequency and Phase in the PC OSD  
submenu.  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Troubleshooting | en 35  
Problem  
Solution  
Incorrect colors  
Select a color temperature in the Color Tone  
menu.  
- or -  
Use the Reset function to reset to the default  
settings.  
The error message “Out PC is operating with either a resolution or timing  
of Range” is displayed  
mode that is not supported by the monitor.  
Change the PC timing mode to one of the valid  
combinations below:  
640 x 480 (60/72/75Hz)  
720 x 400 (70Hz)  
800 x 600 (60/75Hz)  
1024 x 768 (60/75Hz)  
1280 x 768 (60Hz)  
1280 x 960 (60Hz)  
1280 x 1024 (60Hz)  
1366 x 768 (60Hz)  
1600 x 1200 (60Hz)  
1920 x 1080 (60Hz)  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
36 en | Maintenance  
Bosch HD LCD Monitors  
9
Maintenance  
To clean the LCD panel, wipe off water droplets or oil  
immediately with absorbent cotton or a soft lint-free cloth.  
Staining and discoloration may occur if left on the panel for  
long periods. If the surface (polarizer) of the LCD panel is dirty  
or stained, use absorbent cotton or a soft lint-free cloth to  
remove the residue as follows:  
1. Turn off the display and disconnect it from the power  
supply.  
2. Do not spray any liquid directly on the screen. Dampen a  
clean, soft, lint-free cloth with water only (using a paper  
towel or dirty cloth can scratch the screen).  
3. Gently wipe the screen starting from the top of the screen  
to bottom wiping in a downward motion. Be careful not to  
press too hard to avoid damaging the screen.  
4. To avoid streaking, wipe the screen again with another  
clean, dry, lint-free cloth.  
NOTICE!  
If water does not work, use a mild cleaner labeled for use with  
LCD panels, available at office supply stores.  
Do not use any of the following as a cleaning agent:  
Ketone type materials  
Ethyl alcohol  
Ethyl acid  
Toluene  
Methyl chloride  
Ammonia  
Use of these materials may permanently damage the polarizer  
due to a chemical reaction.  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch HD LCD Monitors  
Technical Specifications | en 37  
10  
Technical Specifications  
Model  
UML-193-90  
UML-223-90  
LCD Specifications  
LCD Type  
Backlight Type  
Pixel Pitch (H x V)  
Brightness  
18.51-in. Digital LCD  
LED  
0.3 x 0.3 mm  
21.53-in. Digital LCD  
LED  
0.248 x 0.248 mm  
2
2
250 cd/m (typical)  
250 cd/m (typical)  
Contrast Ratio  
Response Time  
Resolution (H x V)  
Frequency  
1000:1 (typical)  
5 ms (typical)  
1366 x 768  
1000:1 (typical)  
5 ms (typical)  
1920 x 1080  
Horizontal: 31 - 64 MHz Horizontal: 31 – 75 MHz  
Vertical: 50 – 75 Hz  
Active Display Area 409.8 x 230.4 mm  
Vertical: 50 – 75 Hz  
476.64 x 268.11 mm  
(W x H)  
Input Signal  
HDMI  
(16.1 x 9.1 in.)  
(18.8 x 10.6)  
1 input  
DVI-D  
PC RGB  
Audio  
1 digital input  
15-pin D-Sub connector  
1 input (stereo)  
Speaker (8 Ohm, 2 W)  
1 input  
Upgrade  
Packing Dimensions 505 x 380 x 130 mm  
570 x 420 x 130 mm  
(W x H x D)  
(19.88 x 14.96 x 5.12 in.) (22.44 x 16.54 x 5.12 in.)  
Net Weight  
Gross Weight  
Electric Ratings  
3.0 kg (6.6 lbs)  
4.4 kg (9.7lbs)  
3.6 kg (7.9 lbs)  
5.2 kg (11.5 lbs)  
12 VDC, 3.5 A (monitor)  
120/230 VAC, 50/60 Hz (power adapter)  
Bosch Security Systems, Inc.  
User's Manual  
F.01U.272.027 | 1.0 | 2012.08  
38 en | Technical Specifications  
Bosch HD LCD Monitors  
F.01U.272.027 | 1.0 | 2012.08  
User's Manual  
Bosch Security Systems, Inc.  
Bosch Security Systems, Inc.  
850 Greenfield Road  
Lancaster, PA 17601  
U.S.A.  
© Bosch Security Systems, Inc., 2012  

HP Hewlett Packard Hewlett Packard Computer Monitor 7550 User Manual
GE 20 Feb User Manual
Electrolux SIG 554 User Manual
Cisco Systems UC520W8U2BRIK9 User Manual
Cisco Systems Cisco Unified IP Phone 7942G User Manual
Cisco Systems ASA5500XSSD120 User Manual
ATTO Technology Computer Hardware FC 21PS User Manual
Asus MOTHERBOARD K8N E User Manual
AMD Turion 64 X2 User Manual
Acer Computer Monitor ADPC1940 EN 3 User Manual